DINTEK's Data Centre Solution

• A three-layer design allows for easy access of all 12 cassette modules.
• Small 1RU standard rack size provides maximum density.
• Each cassette is removable and can be easily customized for specific connectivity applications.
• Cable management is simple and designed for easy access and recognition.
• Removable back cover is for open access to trunk cables.
  

One of the biggest concerns IT professionals have is the lack of space in the data center. Whether your data center is connecting a small business or multiple businesses, it seems that space is always at a premium. IT workers are always trying to cram, bend, squash their cables into the limited space available. This is the wrong way to go about managing your networking space.

One of the best space savers in the data center is the high density fiber enclosure. These enclosures allow you to increase port density, allowing you to fit more cables into a smaller space. Most importantly, they allow you to save space and stay organized. By using high density enclosures, you will be able to adhere to the TIA-942 standards for structured cabling, be better prepared for any future moves, adds or changes, and make your life much, much simpler. The DINTEK Light-LINKS Data Center fiber enclosures come in a variety of sizes so you can customize for your specific needs.

Patch cords are such a common component in data center set-ups that the significance of their role in data transmission can tend to be overlooked. Not just any patch cord can handle heavy data transmission, and trying to get by with lower quality or lesser capability is a gamble data centers cannot afford. 

Fiber cables from some manufacturers are starting to utilize sub-standard fiber cores, because changes in the way fiber is produced make the fiber cheaper. 

There is always a trade-off however, and this is in the quality of the fiber which ultimately effects performance.

For DINTEK, quality and transmission performance are our main priority. Therefore our fiber patch cords are manufactured using only Corning fiber cores. This gives the end user peace of mind that data transmission will not be compromised in such a mission critical environment.

​DINTEK offers a wide range of transceivers, with a variety of data rates, distances, and wavelengths. We can supply all form factors of fiber optic transceivers including SFP, SFP+, XFP, QSFP+, QSFP+ 28, CFP, X2, and Xenpak. Fiber Optical Transceiver module data rates range from 2Mbps ~ 400Gbps.

 40G QSFP+ AOC

40G 4*SFP+ AOC

40G QSFP+ DAC

 ​QSFP4*SFP + -DAC

Category 8 Plug 

The DINTEK PowerMAX-XLR8^TM Category 8 Screened Field Termination RJ45 Plug offers easy, toolless termination and complies fully with ISO/IEC 11801, & ANSI/TIA-568-2-D, Category 8 standards. It offers a fully shielded die-cast zinc alloy, nickel plated body and gold-plated phosphor bronze contact pins.
• IDC termination accepts wire gauges from 22 to 24AWG.
• Tooless termination.
• Supports 25 – 40 Gigabit Ethernet.
• RoHS, Reach/SVHC compliant.

Category 8 Plug 

The DINTEK PowerMAX-XLR8TM Category 8 cabling infrastructure has been designed to support short-distance (between 5 and 30 meters) runs of 25GBase-T or 40GBase-T transmission. A choice of compatible Patch Panel frames with 24 port density in both black and chrome are available. 

The socket itself is housed in a high quality zinc die cast housing, which opens at the rear in a butterfly manner to reveal the IDC termination points. Once the pairs are arranged in the cable management cap and
trimmed it is a simple case of closing the 'butterfly' together to complete the termination.

Designed for enhanced cable management, DINTEK angled patch panels are angled in order to route patch cords directly into vertical cable managers on either side of the panel.

An economical cable management solution which create vertical and horizontal pathways that store and organize premise cables and patch cords on two and four post Rack Systems.

• Unique plastic finger design, providing frequent 1U spacing of the cable guides that aligns precisely with the cabinet spacing.
  
• Snap-on covers are included and swing open to the right or left to provide easy access and protect cables when closed.
  
• Easy to be managed for moves, adds and changes.
  
  

​Universal Horizontal Cable Manager creates a highly functional horizontal pathway for patchcords and multimedia applications using coax, copper and fiber optic cables. After routing the cables or cords, simply snap on the cover for a clean, professional appearance.

• Unique plastic finger design to decrease potential cable damage.
  
• Snap-on covers are included and open up or down to access cables.

​DINTEK's Data Center 4-post Rack offers the strength and stability of a cabinet in an open architecture and is available in a variety of styles.

• Offering the strength and stability of a cabinet, but in an open mounting system.
  
• Facilitate installing and supporting by fixed mounting rails with RMU markings.
  
• Saving space and easy maintenance.
  
• Easy to be managed for moves, adds and changes.

Cable Distribution Spools provide slack management and strain relief for patch cords and jumper cables inside Vertical Cable Managers.

• Spools are 50 mm in diameter,100 mm L and 87 mm H (height can be customized).
• Made from black plastic, the flame-retarding reaches UL94V-0 standard.