• Register
Product Code: 1406-05002

Category 6A 24 Port UTP Tray Patch Panel

You Can Request Pricing By Building Up An RFP:
- +

PowerMAX+ 1U 24P Cat.6A UTP Tray Patch Panel

The increasing requirement for faster access to greater volumes of data, evolving network standards and fast developing technology make it necessary for infrastructure managers to be able to provide higher bandwidth connections to the desktop via Category 6A. In order to complete these high bandwidth connections the patch panel connections must be able to allow for a high performance termination with minimal NEXT and Alien Cross Talk.

DINTEK’s PowerMAX+TM Category 6A 24 & 48 Port UTP Tray Patch Panels provide for these premium terminations allowing the horizontal cabling to effectively connect to the back bone with little effect to overall



  • Designed to be quick and easy to install and terminate
  • Compatible with CAT.6A component performance (568-2.D)


  • Voice; T1
  • ISDN
  • 100BASE-T Ethernet (IEEE802.3)
  • 155/622Mbps 1.2/2.4 Gbps ATM
  • 1 Gigabit Ethernet
  • 10Gb Ethernet
  • Power Over Ethernet


Standards Conformance

  • Meets all requirement specified in connecting hardware req. for:
  • ISO/IEC 11801, Category 6A
  • IEC 60603-7-51
  • ANSI/TIA-568-C.2, Category 6A
  • UL 1863 safety listed
  • ETL verified
  • UL 94V-0 flammability standard

Ordering Information
Product NumberProduct NamePacking


PowerMAX+ 1U 24 Port Cat.6A UTP Tray Patch Panel


Technical Specifications


Cold Rolled Steel


Plate: SPCC-SD 16G

Contact TypeSpring Wire
MaterialPhosphor Bronze Alloy Plated with 50 micro-inch of Gold over 70~100 micro-inch of Nickel

Housing: High-impact, FLAME-RETARDANT plastic, UL94V-0 rated

Rear Terminals
Terminal TypeIDC
MaterialPPhosphor Bronze Alloy with 100 micro-inch 100% Sn Alloy
Physical Ranges
Temperature Range
Storage-40 to +70℃
Operational-10 to +60℃
Relative humidity
OperationalMax. non-condensing 93%
Retention50N (11 Ibf) for 60s ± 5s
Insertion/Extraction life750 cycles minimum
Number of IDC terminations200 minimum
Total mating Force

800gms for a 8 wire leads minimum

Insulation Resistance between conductors500 mΩ min.@ 100V d.c
Dielectric Withstanding Voltage1000 V d.c. or a.c. Peak Contact to Contact @ 60 Hz for 1 MIN.
Spring Wire Contact Resistance20 mΩ Max.
Voltage//Current Rating150VAC/1.5A
IDC Contact Resistance2.5 mΩ Max.

Stay Up To Date

Thanks for coming to use the services provided by logging in to the DINTEK website. Press the login button.

Once you are logged into the DINTEK Website. You will have access to additional content and services depending on the level of access that has been assigned to you.